CARTES D'ACQUISITIONS

Cartes d'Acquisitions

Cartes d’Entrées/Sorties dont les caractéristiques sont particulièrement bien adaptées pour répondre aux exigences des applications industrielles. Isolation en entrée pour séparer le monde analogique du numérique, respect des normes de sécurité (ligne de fuite, couche analogique et numérique distincte, filtre sur les entrées, protection aux surtensions, CEM). Cartes multi-fonctions 16-bit, cartes pour la mesure de température, de déplacement, de pression. Carte de comptage multi-fonctions ...

CARTES ISA ENTREES / SORTIES NUMERIQUES

ISO-P32C32

32-channel Optically Isolated Digital Input and 32-channel Optically Isolated Open-Collector Output

32-channel optically isolated digital input
32-channel optically isolated digital output/Open-collector
DC/DC converter build-in
3000 VDC isolation voltage
Interrupt handling
Interrupt source : channel 0 and channel 16

ISO-P32S32W

32-channel Optically Isolated Digital Input and 32-channel Optically Digital Open-collector Output Board

32-CH optical-isolated digital input
32-CH optical-isolated digital output
Isolation Voltage: 3750 V (Using external power)
DC/DC converter build-in
Interrupt handling
Two Interrupt source, channel 0 and channel 16
Open Collector: 500 mA (8-channel), 100 mA (24-channel), Current Sinking, NPN

ISO-C64

64-channel Optically Isolated Open-collector Digital Output Board

64-channel optically isolated digital output / Open-collector
Four isolated bank
3750 VDC isolation voltage

ISO-P64

64-channel Optically Isolated Digital Input

64-channel optically isolated digital input
DC/DC converter build-in
Four isolated bank
3000 VDC isolation voltage
Interrupt handling
Interrupt source : channel 0 and channel 16

ISO-730

32-channel Isolated Digital I/O Board

16-channel optically isolated digital input
16-chanel Optically isolated open-collector output
16-channel TTL level digital input (Non-isolation)
16-channel TTL level digital output (Non-isolation)
DC/DC converter build-in
One 37-pin D-sub connector and Two sparate 20-pin header for isolated I/O
Two 20-pin header for TTL digital I/O (Non-isolatiton)
2500 VDC isolation voltage
Interrupt handling
Interrupt source : channel 0 and channel 16

DIO-144 DIO-96

96-channel OPTO-22 DIO Board / 144-channel OPTO-22 DIO Board

Double side SMT , short card, power saving
DIO-144 : 144 digital I/O lines
DIO-96 : 96 digital I/O lines
Emulate 8255 mode 0 (Basic Input / Output mode)
Buffer output for higher driving capability than 8255
Register compatible to 722 series
Programmable interrupt handling
DIO-144 : Six 50-pin Header
DIO-96 : Four 50-pin Header
Output status readback

DIO-64/3

32-channel Digital Input and 32-channel Digital Output, 3 Timer/Counter Board

32 digital input lines
Buffer output for higher driving capability
3 independent programmable 16 bit down counter
One 16-bit counter , one 32 bit counter with a 4 MHz time base
Breadboard area for add-on circuit
Backward compatible to 720 series card

DIO-64/6

32-channel Digital Input and 32-channel Digital Output, 6 Timer/Counter Board

32 digital input lines
Buffer output for higher driving capability
3 independent programmable 16 bit down counter
One 16-bit counter , one 32 bit counter with a 4 MHz time base
Breadboard area for add-on circuit
Backward compatible to 720 series card

DIO-48

48-channel OPTO-22 DIO Board

Connects directly to DB-24P,DB-24R,DB-24PR,DB-885B ,or any OPTO-22 compatible daughter board
48 digital I/O lines
One 16-bit counter
IRQ Level : IRQ3 ~ IRQ15
Interrupt Trigger by Event / Timer / Port C3 , C7
Clock Source can be setting : RTC (32.768 k)/2 M/4 M/8 MHz
Emulate two industrial-standard 8255 mode 0
Two 50-pin flat cable connector
Output status read back

DIO-24

24-channel Digital I/O Board

24 digital I/O lines
Emulate 8255 mode 0 (Basic Input / Output mode)
Buffer output for higher driving capability than 8255
Register compatible to 724 series
Programmable interrupt handling
Output status readback

P8R8DIO

Isolated 8 Digital Input and 8 Relay Output Board

Relay output Channel
optically isolated digital input channels
AC/DC signal Input ; AC signal input with filter
Connector pin assignment is compatible to 725 series
Power Requirements : +5 V 200 mA (max.) ; +12 V 260 mA (max.)

P16R16DIO

Isolated 16 Digital Input 16 Relay Output Board

Relay output Channel
optically isolated digital input channels
AC/DC signal Input ; AC signal input with filter
Connector pin assignment is compatible to 725 series
Power Requirements : +5 V 200 mA (max.) ; +12 V 260 mA (max.)

TMC-10

10-channel Timer/Counter Board

On board four 8254 timer/counter chips
Eight independent 16-bit timer / counter and two cascaded 32-bit Timer/Counter
11 interrupt levels ,jumper selectable
Two internal clock source
Eight channel external clock source.
8-bit digital output

WDT-01

Intelligent Watchdog Timer Card

Watchdog Timer:
Software programmable from 0.01 second to 167772.15 seconds.
Temperature Monitor:
Temperature:0°C-75°C;
Precision:+-1°C;onbord 2 digital LED display; Warming temperature Setting:50°C,60°C,70°C or none.
Computer Power Monitor:
PC Power +5V,External Power +12V
Transmit Message Includes:
watchdog timer state,Temperature status,Current Temperature scale, External & PC power status...etc.
Power Required:
1.External power:+12V,3W or 2.Internal power:+12V,3W
Printer-like I/O Interface:
LPT0(3bch),LPT1(378h),LPT(278h)or User Define, only need 3 I/O ports
Output Signals:

Signal/Function	WDT timeout	Over Temperature	Power failure
Reset	Yes	No	No
IRQ	Yes	Yes	No
I/O status	Yes	Yes	Yes
RELAY	Yes	Yes	No
TTL	Yes	Yes	No
LED	Yes	Yes	Yes
RS232	Yes	Yes	Yes
Buzzer	Yes	Yes	Yes

WDT <=> Watchdog
Power failure LED display only on terminal board.
IRQ:3,4,5,6,7,9,10,11,12,14,15
4 BIT TTL output:
    logic high:2.4Vdc min,source 400uA.
    logic low:0.5Vdc max,sink-10mA
    Two Relay for watchdog or temperature failure
    Contacts:FoRM c.
    Max switched current:1A 30V/dc
    Max switched voltage:120Vac/60Vdc
    Max carry current:1.25AC/DC
Output Signals:

	WDT-01
Software driver	Yes
on-board 7-seg LED	Yes
Temperature measurement	Yes
on board buzzer	Yes
Relay output for watchdog alarm	Yes
Relay output for temperature alarm	Yes
Terminal board	Yes
Other	Yes

WDT-02

Intelligent Watchdog Timer Card Without Terminal Board

Watchdog Timer:
Software programmable from 0.01 second to 167772.15 seconds.
Temperature Monitor:
Temperature:0°C-75°C;
Precision:+-1°C;onbord 2 digital LED display; Warming temperature Setting:50°C,60°C,70°C or none.
Computer Power Monitor:
PC Power +5V,External Power +12V
Transmit Message Includes:
watchdog timer state,Temperature status,Current Temperature scale, External & PC power status...etc.
Power Required:
1.External power:+12V,3W or 2.Internal power:+12V,3W
Printer-like I/O Interface:
LPT0(3bch),LPT1(378h),LPT(278h)or User Define, only need 3 I/O ports
Output Signals:

Signal/Function	WDT timeout	Over Temperature	Power failure
Reset	Yes	No	No
IRQ	Yes	Yes	No
I/O status	Yes	Yes	Yes
RELAY	Yes	Yes	No
TTL	Yes	Yes	No
LED	Yes	Yes	Yes
RS232	Yes	Yes	Yes
Buzzer	Yes	Yes	Yes

WDT <=> Watchdog
Power failure LED display only on terminal board.
IRQ:3,4,5,6,7,9,10,11,12,14,15
4 BIT TTL output:
    logic high:2.4Vdc min,source 400uA.
    logic low:0.5Vdc max,sink-10mA
    Two Relay for watchdog or temperature failure
    Contacts:FoRM c.
    Max switched current:1A 30V/dc
    Max switched voltage:120Vac/60Vdc
    Max carry current:1.25AC/DC
Output Signals:

	WDT-02
Software driver	Yes
on-board 7-seg LED	No
Temperature measurement	No
on board buzzer	No
Relay output for watchdog alarm	No
Relay output for temperature alarm	No
Terminal board	No
Other	Yes

PCL-720+

64-ch Digital I/O and Counter ISA Card

32 TTL-level digital input channels
32 TTL-level digital output channels
High-output driving capacity
Low-input loading
3 programmable counter/timer channels
User configurable clock source
Breadboard area for custom circuits

PCL-722

144-ch Digital I/O ISA Card

Emulates 8255 PPI mode 0
Buffered circuits for higher driving capacity than the 8255
Interrupt handling
Output status readback
Pin compatible with Opto-22 I/O module racks

PCL-724

24-ch Digital I/O ISA Card

24 TTL digital I/O channels
Emulates mode 0 of 8255 PPI
Interrupt handling
Opto-22 compatible 50-pin connectors
Output status readback

PCL-725

8-ch Relay and 8-ch Isolated Digital Input ISA Card

8 relay output channels and 8 isolated digital input channels
LED indicators to show activated relays
4 Form C and 4 Form A type relay output channels
Male DB37 matching connector included
Output status read-back

PCL-730

32-channel Isolated Digital I/O Card

32 isolated DIO channels (16 inputs and 16 outputs)
32 TTL-level DIO channels (16 inputs and 16 outputs)
High output driving capacity
High-voltage isolation on isolated I/O channels (2,500 VDC)
Interrupt capability
Two 20-pin connectors for isolated digital I/O channels and two for TTL digital I/O channels
D-type connector for isolated input and output channels

PCL-731

48-ch Digital I/O ISA Card

48 TTL digital I/O channels
Emulates mode 0 of 8255 PPI
Interrupt handling
Opto-22 compatible 50-pin connectors
Output status readback

PCL-733

32-channel Isolated Digital Input Card

32 isolated, bidirectional digital input channels
High-voltage isolation (2,500 VDC)
Interrupt capacity
D-type connectors for isolated input channels
Reverse voltage protection for isolated input channels (up to 24 VDC)

PCL-734

32-channel Isolated Digital Output Card

32 isolated digital output channels
High output driving capacity
High-voltage isolation on output channels (1,000 VDC)
High sink current on isolated output channels (200 mA/channel)
Integral suppression diodes for inductive loads
Wide output range (5 ~ 40 VDC)
D-type connectors for isolated output channels

PCL-735

12-ch Relay ISA Card with 16-ch DI/O

12 relay outputs
LED relay status indicators
Male DB37 matching connector included
Relay status readback function

PCL-836

6-ch, 16-bit Counter/Timer ISA Card

Periodic interrupt generation
6 independent 16-bit counters
Digital filter for noise reduction
Binary or BCD counting
Programmable frequency output
Complex duty-cycle output
Single-shot output
16-bit TTL input and 16-bit TTL output ports
Selectable interrupt input channel
Up to 10 MHz input frequency
Pulsewidth and period measurement
Time-delay generation
F/V conversion and accumulation

ACL-7130

16-CH Isolated DI &16-CH Isolated DO Card

16-CH isolated digital inputs and 16-CH isolated digital outputs
16-CH TTL digital inputs and 16-CH TTL digital outputs
Non-polarity digital input range (isolated digital inputs)
2500 VRMS optical isolation
Sink current up to 500 mA on each isolated output
One 8254 chip on board which provide a set of cascaded timers and one independent counter
Two external interrupt sources
Compact, half-size PCB

ACL-7225

16-CH Relay Outputs & 16-CH Isolated DI Card

PC AT bus
8-CH SPDT (Form C) & 8-CH SPST (Form A) relays
Nonlatching relays
On-board LED indicators for relay status
On-board relay driving circuits
Relay output status read back
16-CH isolated digital inputs
On-board low-pass filtering for digital inputs

ACL-7125

8-CH Relay Outputs & 8-CH Isolated DI Card

PC AT bus
4-CH SPDT (Form C) and 4-CH SPST (Form A) relays
Nonlatching relays
On-board LED indicators for relay status
On-board relay driving circuits
Relay output status read back
8-CH isolated digital inputs
On-board low-pass filtering for digital inputs

ACL-7122 / PET-48DIO

Opto-22 Compatible 144/48-CH Digital I/O Cards

High-density 144-CH digital inputs/outputs (ACL-7122.)
48-CH digital inputs/outputs with a timer (PET-48DIO)
TTL/DTL compatible digital I/O channels
Direct interface with OPTO-22 compatible I/O modules
Emulates industry standard 8255 PPI (mode 0)
Buffered circuits for high driving capacity
Output status read back
Programmable interrupt handling

ISA, ENTREES / SORTIES ANALOGIQUES

CARTES PCI ENTREES / SORTIES NUMERIQUES

PCI, ENTREES / SORTIES ANALOGIQUES

PCI, MESURE DE TEMPERATURE

PCI, MESURE DIMENSIONNELLE

PCI, MESURE DE PRESSION

PCI Express, ENTREES / SORTIES NUMERIQUES

PCI Express, ENTREES / SORTIES ANALOGIQUE

MODULES, CABLES ET CONNECTIQUES DE RACCORDEMENTS

VALIDYNE SYSTEM est une entreprise, spécialiste dans les domaines Informatique industriel, télécommunication sur voix IP (standards téléphoniques en voix sur IP et de la téléphonie sur IP et de solutions WEB multimedia audio / vidéo au travers d'un réseau de frabricants et de partenaires.